Alumetal | English
Alumetal Official Web Site
Why An Original Turbo?
How To Install A Turbo
| Other Products
| Offer – Contact Us
Order Your Turbo
Essential precautions to replace a turbochargers.
Make sure that the engine is in good conditions (compression, engine block exhausts, electronic components, etc.).
Change engine oil, oil filter and air filter.
Replace the oil delivery pipe to the turbochargers (ALWAYS!)
Do not use silicones or liquid gaskets of any type
Make sure that no impurity or foreign body is present in the suction pipes.
Check (and potentially replace) the oil return pipe in the sump.
Fill the lubrication circuit of the turbochargers before securing the oil delivery pipe.
Let the engine revolve at minimum revolutions for at least 1 minute after starting the engine before accelerating.
Travel 200-500 km and change the engine oil again.
The original turbochargers are tested and subject to the strictest quality checks.
In case the aforementioned precautions are not respected, the warranty claim may be rejected.
specific technical instructions
Turbo Install Step by Step
Alumetal Turbochargers SA
, Via Cereda 3 CH 6828 Balerna (Switzerland).Ph: +41 091 695 40 24 / +41 091 695 40 34 E-mail
© 2015 Alumetal. All Right Reserved |
Creazione siti internet Varese